Shipping The Printer; Repacking The Printer; What's Involved - MINOLTA-QMS 2200 User Manual

Shipping the Printer

If you need to relocate or ship your printer after it's been installed, follow the procedures
in this guide to prevent damage to the printer and to keep your warranty valid.
If you're returning just the printer for service, do not return the interface cables, power
cable, documentation, media tray(s), or accessories.
Attention
MINOLTA-QMS cannot be held responsible for damage to your printer during
shipment that results from the improper packaging of your printer. You must use the
instructions given in this guide, and you must repack the printer in its original
shipping carton with the original packing materials. These supplies must be replaced
prior to shipping the printer.
If you need replacement packaging, in the United States call MINOLTA-QMS at
1 (251) 633-4300 x2530 and request part number 2600674-901. In locations outside
the United States, refer to the Service & Support Guide or www.minolta-qms.com. If
you return the printer for service, be sure to write the RMA (Return Merchandise
Authorization) number you received from your customer support representative
prominently on the carton before shipping the printer.

Repacking the Printer

What's Involved?

Repacking your printer for shipment involves the following steps. Each is described in
more detail in the following sections.
1
Remove the cables.
2
Remove the fuser oil roller.
3
Remove the toner cartridges.
4
Remove the waste toner pack.
5
Remove the OPC drum.
Shipping the Printer 169