Solving Other Problems - MINOLTA-QMS 2200 User Manual

Solving Other Problems

Symptom
Data was
sent to the
printer, but it
doesn't print.
Printer
resets.
Printing
takes too
much time.
Solving Other Problems
Cause
An error message is dis-
played in the message win-
dow.
The transfer belt installa-
tion guide is not set cor-
rectly in the installation rail.
Occasionally, software
applications interfere with
each other.
The printer is set to a slow
printing mode (for example,
for OHP, thick stock, or
some other special kind of
media).
The printer is set to power
saving mode.
The printer memory is
insufficient.
Solution
Handle according to the message displayed.
Remove the transfer belt. Place the front end of the
intermediate transfer unit installation guide (2 locations)
correctly in the installation rail. Next, lightly push in the
unit about 6 inches (152.4 mm). Release the top handle.
Holding the front handle, carefully push the transfer belt
in.
Some applications send a printer prep file to the printer
at the beginning of each document. When this occurs,
other prep files cannot be sent without resetting the
printer. Monitor your activities to see if there is a correla-
tion between your use of a certain application and the
printer resetting. If so, contact the application developer.
It takes more time to print with special media. When
using regular paper, make sure that the media type is
set properly in the driver.
It takes a little time for printing to start in power saving
mode. If you do not want to use this mode, disable it.
Add optional memory.
107