Autoduplexing; Upper And Optional Media Trays - MINOLTA-QMS 2200 User Manual

When refilling media, first remove any media remaining in the tray. Stack it with the
new media, even the edges, then reload it. Although the magicolor 2200 DeskLaser
was designed for printing on a wide range of media types, it is not intended to print
exclusively on a single media type except plain paper. Continuous printing on media
other than plain paper (such as envelopes, labels, thick stock, or transparencies) may
adversely affect print quality or reduce engine life.
For media other than standard plain paper or transparencies, the driver (Paper tab,
Paper Type option) on the control panel needs to be selected.
It is important to set the multipurpose tray to the appropriate media size in order to
obtain optimum printing results.

Autoduplexing

Duplex (2-sided) printing can be done automatically with the optional duplex unit
installed.
Only up to 28 lb bond (105 g/m²) plain paper can be duplexed.
If you are printing duplex from the upper or optional tray, load the media printing-side
down with the top of the media (or letterhead or memo information) toward the right side
of the tray. If you are printing duplex from the multipurpose tray, load the media
printing-side up with the top of the media toward the printer. Set the driver, for example:
The following steps apply to the Windows Me/2000/NT4/98/95 printer driver. If you
are using the Windows XP driver, select Flip on Long Edge or Flip on Short Edge
from the Duplex Options on the Paper tab.
1
In the printer driver, make sure you have selected Duplexer and clicked on the
Add button.
2
In the printer driver, select Simplex (one-sided pages), or Long Edge (flipped hori-
zontally as in a loose-leaf notebook), or Short Edge (flipped vertically as on a clip-
board) as the Duplex option.
3
Click OK.

Upper and Optional Media Trays

Loading Media 41