MINOLTA-QMS 2200 User Manual page 133

This message...
MEDIA JAM TRANSFER
MEDIA JAM UPPER TRAY
MEDIA MISMATCH
PROCESSING
PUT < X > IN INPUT < Y >
PUT < SIZE> PAPER IN < BIN> Engine/Chain Inputbins is set to
PUT < TYPE MEDIA> IN INPUT
BIN
REMOVE PAPER FROM
MAILBIN < X >
REPLACE < X >
WARMING UP
Status, Error, and Service Messages
means...
Transfer jams occur in the trans-
fer roller area. This type of jam
means that the media did not
make it to the paper exit area.
Media has jammed while being
pulled from the specified tray.
The media detected in the tray
doesn't match the media size
setting.
The printer is actively process-
ing jobs.
The < X > specified media is not
in the input tray < Y >.
Off and the displayed tray is
empty. Refill it with the specified
size media. < SIZE> is the
media size detected by the
engine, and < BIN> is the empty
tray.
Engine/Chain Inputbins is set to
On and a chained tray is empty.
The mailbin identified by < X > is
full.
The specified item < X > needs to
be replaced, such as the OPC
drum.
The printer is warming up.
Do this...
Locate and remove the
jam.
Change the media in the
tray or change the
media size setting.
No action needed.
Refill the tray with the
specified type media.
Refill the tray with the
specified size media.
Refill the tray with the
specified type media.
Remove the paper from
the identified mailbin.
Replace the specified
item.
Wait. No other action
needed.
125