MINOLTA-QMS 2200 User Manual page 120

Symptom Cause
The print Media may be moist.
contains
Humidity may be too high.
whited out
The fuser unit may be defec-
areas.
tive.
The OPC drum cartridge is
ABCDE
damaged.
ABCDE
The transfer roller unit is
ABCDE
misinstalled.
ABCDE
Horizontal The toner cartridge is
white lines damaged.
appear in
The OPC drum cartridge is
image.
damaged.
The transfer unit is mis-
installed.
The transfer roller is dam-
aged.
Printouts The printer is not on a level
seem faded enough surface.
on one side.
112
Solution
Remove the moist media and replace it with dry media.
Adjust the humidity in the paper storage area.
Check the fuser unit for damage. If necessary, replace it.
Remove the OPC drum cartridge and check for damage.
If necessary, replace the entire drum kit.
Reset the transfer roller unit.
Remove the toner cartridge and check for damage.
If necessary, replace it.
Remove the OPC drum cartridge and check for damage.
If necessary, replace the entire drum kit.
Make sure that the transfer unit was correctly installed.
Replace the transfer roller.
Level the printer (not exceeding 1.0° slant at any point
around the machine).
Solving Problems with Printing Quality