MINOLTA-QMS 2200 User Manual page 77

Configuring Watermark Edit Options
The following configuration settings are available for watermark options located on the
right-half of the Watermark window:
Watermark Name: The name that identifies the watermark in the Watermark list.
String: The watermark text that appears on the printed media.
Color: Either type or use the scroll buttons on this control to adjust the hue of the
watermark string. There is an adjustment control for red, blue, and green.
Style: Gives you optional choices of bold and italic text for your watermark.
Font: Allows you to specify the font and font size for your watermark. You may
choose from any of the fonts installed on your computer. Changes to the font and/or
font size are reflected in the watermark graphic.
Angle: This option allows you to set the angle of the watermark on your media. You
may select any angle between -90 and 90 degrees. Changes to the angle setting are
reflected in the watermark graphic.
Position: Use the horizontal and vertical controls to adjust the position of the water-
mark on the media. Changes to the position setting are reflected in the watermark
graphic.
To center the watermark on the media, set the horizontal and vertical position
control values to 0.
Watermark Graphic
The Watermark Graphic is located on the lower-left side of the Watermark window. The
graphic shows the media in the selected print orientation with the currently selected
watermark. Changes to the Watermark Edit option settings are represented by changes to
the appearance of the graphic.
Default Button
The Default button on the Page Layout tab allows you to restore the options on this tab to
their default settings.
32-bit SuperDriver Setup 69