Loading Media - MINOLTA-QMS 2200 User Manual

Notes

Loading Media

Take off the top and bottom sheets of a ream of paper.
Holding a stack of approximately 250 sheets at a time,
fan the stack to prevent static buildup for the paper
before inserting it in a tray.
Attention
Always load the media short edge first.
Attention
Do not mix media of different sizes, types, or weights, as this will cause
printer jamming.
40
If you touch the face of transparencies with your bare hands, print
quality may be affected.
Do not handle transparency media too much. Do not fan
transparency media before loading it. Resulting static electricity may
cause printing errors.
Keep the media path clean. Transparencies are especially sensitive
to a dirty media path. If there are shadows on either the top or the
bottom of the sheets, see "Printer Care" on page 80.
You can print continuously with transparencies. However, this could
affect the media feed, depending on the media quality and printing
environment. If problems occur, stop the continuous print and print
one sheet at a time.
Check your application documentation for other information about
printing on transparencies.
Loading Media