MINOLTA-QMS 2200 User Manual page 68

Different Paper for 1st Page
Purpose
Choices
Default
Additional
Choices
1st Page
Purpose
Choices
Default
Notes
Output Source
Purpose
Choices
Default
Notes
Paper Graphic
The paper graphic image changes according to Paper Size, Orientation and Duplex/
Booklet selections, and will display the selected N-up setting.
60
Allows you to select the paper source that will be used for the first page of the
document.
Enabled (selected) —The first page of the document will use the paper
source identified in the 1st Page list.
Disabled —All pages of the document use the same paper source.
Disabled
When enabled is selected, the 1st Page list is activated. See "1st Page" in this
section.
This list allows you to identify the paper source for the first page of the docu-
ment.
Upper Tray
Multipurpose Tray
Optional Tray —Available only on printers with an optional lower feeder unit
installed and the optional tray selected on the Device Options tab.
Upper Tray
This list is disabled (grayed-out) if Different Paper for 1st Page is disabled.
Sets the output bin where printed media is to be delivered.
Upper Tray —The printer will send printed media to the upper output bin.
Mailbin 1-5 —The mailbin output bin (mailbin 1-5).
Upper Tray
Output Source options are supported only on printers with a 5-bin mailbox
installed and the 5-bin mailbox option selected on the Device Options tab.
32-bit SuperDriver Setup