MINOLTA-QMS 2200 User Manual page 33

5
Insert the new fuser oil
roller installation guides
(front, rear) into the fuser
unit installation rail.
6
Carefully lower the roller.
7
Rotate the two oil roller
levers to lock the oil roller into place.
Attention
If the two fuser oil roller release levers are not correctly set, the top cover
cannot be closed. Set the release levers to the roller fixed position.
8
Carefully close the top cover.
Check the release button to make sure the top cover is properly closed.
9
Turn on the printer.
Replacing the Fuser Oil Roller 25