MINOLTA-QMS 2200 User Manual page 132

This message...
MEDIA JAM < X >
MEDIA JAM DUPLEX
MEDIA JAM EXIT
MEDIA JAM FUSER
MEDIA JAM MAIL BIN
MEDIA JAM MPT
PAPER JAM LOWER TRAY
124
means...
A jam has occurred in the < X >
(input bin).
Media has jammed in the duplex
area or duplex refeed area on
the models with duplex units
installed.
Media has jammed between the
print engine and the output tray.
A media jam has been detected
between the fuser and output
tray rollers located near the top
cover.
Exit jams occur in the media
eject area.
Media has jammed leaving the
fuser area.
Mail bin jams occur if the media
is jammed in the 5-bin mailbox
between the printer and the
5-bin mailbox, in the mailbox
eject area, or in the mailbox
transport area.
Media has jammed while being
pulled from the specified multi-
purpose tray.
Tray jams occur between the
standard upper or optional tray
and the print engine. A misfeed
jam may be a sheet of media not
being picked, or it may be that
the media was picked but not
fed properly.
Status, Error, and Service Messages
Do this...
Locate and remove the
jam.
Locate and remove the
jam.
Locate and remove the
jam.