MINOLTA-QMS 2200 User Manual page 94

2
Change to the directory where the system file is located.
For example, assume the file is located on magicolor 2200 DeskLaser CD-ROM
under the directory "loadcode" and that the drive letter for the CD-ROM is E. To
change to the directory where the file is located you would use the following
sequence of commands.
C:\Windows\Desktop> e:
E:> cd loadcode
3
At a command prompt, type
4
When prompted for a user name and password, press Enter for both.
An ftp > prompt displays.
If a message displays denoting invalid password, contact your system administrator.
Otherwise, continue.
5
At the ftp> prompt, change to binary mode by typing
bin
WARNING!
Interrupting the download process may corrupt your printer's operating system. Do not
attempt to stop the download or use the printer's control panel after the download process is
started. After the file download, allow the printer to automatically reboot on its own to
complete the process. Do not manually reboot the printer.
86
ftp ipaddress
(for example, ftp 161.33.128.5 )
Updating System Software