MINOLTA-QMS 2200 User Manual page 61

There are three methods you can use to configure the printer driver. However, these three
methods don't all have the same options or control.
... via the printer driver properties
Gives you access to the General, Ports, Sched-
uling (Windows NT 4.0) or Advanced (Windows
XP/2000), Sharing, Security, and About tabs
Lets you assign the printer settings for all print
jobs
Retains your settings until changed again via
properties
How To:
1 From the Windows Start menu choose Set-
tings.
2 Choose Printers.
3 Select the magicolor 2200 DeskLaser
printer driver.
4 From the File menu, choose Properties.
5 Make your selections, and then choose OK
to save your changes.
6 Close the Printers window.
... via document defaults (Windows NT 4.0) or via printing preferences (Windows XP/2000)
Gives you access to the Paper, Page Layout, Image, Device Options, and About tabs
Lets you assign the default printer settings for all print jobs
Retains your settings until changed again via properties
How To:
1 From the Windows Start menu choose Settings.
2 Choose Printers.
3 Select the magicolor 2200 DeskLaser printer driver.
4 From the File menu, choose Default Document Properties (Windows NT 4.0) or choose Print-
ing Preferences (Windows XP/2000).
5 Make your selections, and then choose OK to save your changes.
6 Close the Printers window.
Configuring the Printer Driver
... via your application's printer setup
Gives you access to the Paper, Page Layout,
Image, Device Options, and About tabs
Lets you assigns the printer settings only for the
current print job
Temporarily overrides the existing default docu-
ment settings
How To:
1 From the application's File menu choose
Print (or, in some cases, Print Setup or
Page Setup).
2 In the Print, Print Setup, or Page Setup dia-
log box, select the magicolor 2200 DeskLa-
ser printer driver.
3 Choose the Properties button.
4 Make your selections, and then choose OK
to save your changes.
5 Choose OK from the Print Setup window.
53