Refilled Toner Cartridges; Replacing The Opc Drum, Laser Lens Cover, And Waste Toner Pack - MINOLTA-QMS 2200 User Manual

Refilled Toner Cartridges

Use of consumables not manufactured by MINOLTA-QMS may cause damage to your
printer and void your warranty. If MINOLTA-QMS printer failure or damage is found to
be directly attributable to the use of non-MINOLTA-QMS consumables, MINOLTA-QMS
will not repair the printer free of charge. In this case, standard time and material charges
will be applied to service your printer for that particular failure or damage.
Replacing the OPC Drum, Laser Lens Cover, and Waste
Toner Pack
Attention
The OPC drum is extremely sensitive to bright light and direct sunlight. Always
leave it in its protective bag until you're ready to install it. Any exposure to light
should be avoided, or permanent damage could result. Any damage resulting from
mishandling of the OPC drum will void the warranty of the OPC drum. Also, handle
the cartridge carefully by its sides so you don't touch the surface (the green part) of
the drum. The drum is also extremely sensitive to hand oils and scratches, both of
which reduce print quality.
When the OPC drum is worn out, the message REPLACE DRUM appears. The printer will
not print until the drum kit is replaced.
When you replace the OPC drum cartridge after a DRUM LOW or REPLACE DRUM
message displays in the message window, the printer automatically recovers. However, the
replaced waste toner pack consumables monitoring system must be reset.
The three items below are included in the OPC drum kit. If one needs replacing, replace
all three items.
Waste toner pack
8

Replacing the OPC Drum, Laser Lens Cover, and Waste Toner Pack

OPC drum cartridge Laser lens cover