Installing The New Opc Drum Cartridge - MINOLTA-QMS 2200 User Manual

Installing the New OPC Drum Cartridge

1
Remove the new OPC drum cartridge from its
shipping box.
Attention
Keep the protective sheet on the cartridge.
Do not touch the protective sheet on the
photosensitive (green) surface or scratch the
surface. This could lower image quality.
Make sure the transfer belt left release lever is still set to its top position
(12 o'clock).
2
Hold the OPC drum car-
tridge level, place the
front end of the OPC
drum cartridge installa-
tion guide into the instal-
lation rail.
3
Carefully push the OPC
drum cartridge in.
Attention
The cartridge should slide easily into the printer. Don't force it.
14 Replacing the OPC Drum, Laser Lens Cover, and Waste Toner Pack