MINOLTA-QMS 2200 User Manual page 76

1
Select the watermark you want to edit from the Watermark list.
When you select a watermark, it displays in the watermark graphic, and the water-
mark configuration details appear in the Watermark Edit fields located on the right
side of the window.
2
Make changes to the settings in each option as needed.
See "Configuring Watermark Edit Options" on page 69 for a description of
Watermark Edit options.
3
Choose OK to save your changes and close the Watermark window or choose Cancel
to disregard your changes.
If you choose another watermark from the list before selecting the OK button, any
changes that were entered for the initial watermark selected will be lost.
Adding a New Watermark
1
Choose the Add button.
When the Add button is selected the Watermark Edit fields will be filled by default
values. You may choose to accept or change any of the default option values.
2
Modify the settings for each Watermark Edit option as needed.
See "Configuring Watermark Edit Options" on page 69 for a description of
Watermark Edit options.
3
Choose OK to save your changes and close the Watermark window or choose Cancel
to disregard your changes.
Deleting a Watermark
1
Select the watermark that you want to remove from the Watermark list.
2
Choose Delete.
The selected watermark disappears from the Watermark list.
3
Repeat steps 1 and 2 for each watermark that you want to remove.
4
Choose OK to save your changes and close the Watermark window or choose Cancel
to disregard your changes.
68 32-bit SuperDriver Setup