Storing The Printer; Relocating The Printer - MINOLTA-QMS 2200 User Manual

Storing the Printer

Keep the following in mind when storing the printer for an extended period:
1
Unplug the printer.
2
Remove the OPC drum, the fuser oil roller, and toner cartridges from the printer and
return them to their original packaging. If the original packaging is not available,
protect the toner cartridges from spilling toner, and protect the OPC drum cartridge
from damage and light.

Relocating the Printer

Occasionally, you may have to move the printer to a different location, either nearby or to
a distant location. To avoid damage to the printer, use these instructions to pack the printer.
1
Turn off and unplug the printer.
2
If the printer has a lower feeder unit and/or a 5-bin mailbox, remove them.
3
If you're moving it to a distant location, follow the instructions for repacking the
printer.
4
Relocate the printer.
WARNING!
The printer weighs about 87.1 lb (39.5 kg) without accessories or consumables installed, and
about 133.7 lb (60.6 kg) with accessories and consumables installed. Always have two people
to lift and move the printer to avoid back injury. Additional assistance may be required if
lifting the printer above waist-level.
5
Unpack and set up the printer in its new location.
6
Reinstall the accessories you removed in step 2.
Refer to the Service & Support Guide or www.minolta-qms.com for additional
information.
168 Storing the Printer