Remove The Cables; Remove The Fuser Oil Roller; Remove The Toner Cartridges - MINOLTA-QMS 2200 User Manual

6
Remove the transfer belt.
7
Remove the duplex unit (if attached).
8
Remove the 5-bin mailbox (if attached).
9
Remove the lower input feeder (if attached).
10
Repack the printer for shipment.
Attention
To avoid toner contamination, DO NOT repack and ship the printer with the
fuser oil roller, toner cartridges, waste toner pack, OPC drum cartridge, and
transfer belt installed.

Remove the Cables

1
Turn off the printer.
2
Remove the power cable and all interface cables.

Remove the Fuser Oil Roller

WARNING!
The fuser unit can become extremely hot and cause severe burns. Make sure the
unit is cool before handling it.
1
Open the printer's top cover.
2
Rotate the two lock levers to release the fuser oil roller.
3
Remove the fuser oil roller.
4
Store the fuser oil roller in its original shipping bag.
5
Close the printer's top cover.

Remove the Toner Cartridges

1
Open the printer's front cover.
2
Remove the four toner cartridges and store them in their original packaging.
170 Repacking the Printer