Power Requirements; Location Requirements - MINOLTA-QMS Magicolor 2200 DP User Manual

Power Requirements

Power
Voltage Fluctuation Rate
Frequency Variation Rate

Location Requirements

„
On a hard, flat, level
supporting the printer, accessories, consumables, and media. Weights are shown
below.
Component
Printer
Consumables (such as toner, OPC drum)
Media
Lower feeder unit
Duplex unit
5-bin mailbox
5 "
A surface can be tested for levelness with a standard round pencil. If the pencil rolls,
the surface is not level. Clear the area of any obstruction or items such as cables
that might prevent the printer from sitting directly on the flat, level surface.
„
In an area with an ambient temperature range of 50°–95° F (10°–35° C) and relative
humidity range of 15%–85% (noncondensating).
„
Away from cooling and heating sources, extreme temperature or humidity changes,
direct sunlight, excessive dust, corrosive chemicals or vapors (such as ammonia),
Requirements
Japan
North America
Europe
Latin America
Japan
North America
Europe
Latin America
Within 50–60 ±3 Hz
(1° or less slant at any point around the machine)
100 VAC 50–60 Hz 12 amps
120 VAC 50–60 Hz 8 amps
220–240 VAC 50–60 Hz 6 amps
120 VAC 50–60 Hz 8 amps
220–240 VAC 50–60 Hz 6 amps
100 VAC ±10%
120 VAC ±10%
220–240 VAC ±10%
120 VAC ±10%
220–240 VAC ±10%
Weight
87.1 lbs (39.5 kg)
11 lbs (5.0 kg) (total)
5.2 lbs (1.9 kg) per ream
14.8 lbs (6.7 kg)
5.3 lbs (2.4 kg)
15.5 lbs (7.0 kg)
surface capable of
147