Installing Accessories - MINOLTA-QMS magicolor 3100 Installation Manual

2
Adjust the media guides to fit the paper
size you're loading.
The tray extender supports long media.
3
Fan a stack of approximately 100
sheets of paper.
A fill limit mark is provided on the inside
of the tray. The multipurpose media tray
holds approximately 100 sheets of 20 lb
bond (75 g/m²) paper.
Attention
Do not overfill the tray. The paper should fit easily between the
guides. Improperly adjusted guides may cause poor print quality,
media jams, or printer damage.
4
Align the edges of the paper, and then
load it with its printing-side up and short
edge toward the printer.
Often, an arrow on the media package
label indicates the printing-side of
the media.
5
Make sure the media fits properly in
the tray.
For further information about loading and
using media, refer to chapter 2, "Using
Media," in the User's Guide .

Installing Accessories

Attention
Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation.
Installing Accessories
15