Network Setup - Avermedia AVerDiGi EB1304 NET Operation Manual

below to customize the sensor state.
Not installed: Indicates that there is no sensor connected
Normal open: Indicates that the initial state of the sensor is normal open. Video
Normal close: Indicates that the initial state of the sensor is normal close. Video
- Sensor Record Time
Set the amount of time (in second) to record after the sensor has been triggered
(3) E-Mail Setup
- SMTP
Enter the SMTP server
- User ID & Password
Enter User ID and Password for e-mail server user identification
- From
Enter the sender e-mail address
- To
The recipient e-mail address and separate it with a semicolon
- Subject
Enter the message title
- Message
Type the message

8.1.1.4 Network Setup

(1)
(1) IP Mode
- Static IP
Assign a fixed and global IP address for the DVR system
IP: Assign a constant IP address which real IP addresses give from ISP.
Mask: Enter the subnet mask of the IP address which user has assigned to DVR
system.
recording initiate when there is a changes in the sensor state
recording initiate when there is a changes in the sensor state
37
(2)
(3)