Network Setup - Avermedia AVerDiGi EB1704HB User Manual

8.1.1.5 Network Setup

(1)
(1) IP Mode
- Static IP
Assign a fixed and global IP address for the DVR system
IP: Assign a constant IP address which real IP addresses from ISP.
Mask: Enter the subnet mask of the IP address which user has assigned to DVR
system.
It is a bitmask used to tell how many bits in an octet(s) identify the subnetwork, and how
i
many bits provide room for host addresses.
Gateway: Enter the network gateway IP address
DNS: Domain Name Server translates domain names (such as www.abb.com.tw) to
IP addresses. It will translate the domain name into IP address when DVR system
request.
- DHCP
Assign the IP address by local DHCP server to DVR system.
The Dynamic Host Configuration Protocol (DHCP) is a set of rules used by a
i
communications device (such as a computer, router or networking adaptor) to allow the
device to request and get an Internet address from a server which has a list of addresses
available for assignment.
- PPPOE
Point-to-Point Protocol over Ethernet is a network protocol for encapsulating PPP
frames in Ethernet frames. It is used mainly with ADSL services.
User ID & Password: fill in the user account and password that user applied from
your ISP for PPPOE connection.
(2) Server Port
A port is using for the remote connection. Any port can be assigned as a server port,
except the ports already used by the network services.
(3) DDNS
DDNS (Dynamic Domain Name Service) is a data query service mainly used on the
Internet for translating domain names into Internet addresses. Users can register their
51
(2)
(3)