Network Setup - Avermedia AVerDiGi EB3004 NET User Manual

8.1.1.5

Network Setup

(1)
(2)
(3)
(4)
(1) IP Mode
The system provides 3 types of IP setup mode – STATIC, DHCP, and PPPOE.
STATIC: Assigns a constant IP address for the DVR system.
-
DHCP: Assign the IP address by local DHCP server to DVR system.
-
The DHCP (Dynamic Host Configuration Protocol) is a set of rules used by a communications
i
device (such as a computer, router or networking adaptor) to allow the device to request and
get an Internet address from a server which has a list of addresses available for assignment
PPPOE: Point-to-Point Protocol over Ethernet is a network protocol for encapsulating PPP frames
-
in Ethernet frames. It is used mainly with ADSL services. If your network is using ADSL service
connecting to internet, and then, select PPPOE mode.
(2) Remote audio record
Enable/disable the audio recording at remote site.
(3) DDNS
Dynamic Domain Name Service is a data query service mainly used on the Internet for translating
domain names into Internet addresses.
Domain Name: Enter the domain name that user has registered.
-
- Password: Enter the password that user has setup when registered the domain name.
(4) Stream Setup
Click it to setup each channel stream and quality for the remote site viewing.
Enable
-
Enable/disable the channel. If channel is disabled, the video stream will not been seen in
remote site and transmitting to remote site.
- Network Stream FPS
62