Network Setup - Avermedia AVerDiGi SEB3104H User Manual

3.1.2 Network Setup

Setup system network parameters. Click OK to save the configuration, click Cancel to exit without
save. Click to call out virtual keyboard for entering value in necessary columns.
(1)
(2)
(3)
(4)
(1) Transmitting Cameras
Mark the camera number check box that user wants to make it accessible via internet using
WebViewer, Remote Console, PDA Viewer and HandyViewer (still image).
(2) Network Type
Select the type of network that user wants to use.
- Static IP: Assigns an fixed IP address for the DVR system.
- DHCP: Assign an IP address to DVR system by local DHCP server.
- PPPOE: Point-to-Point Protocol over Ethernet is a network protocol for encapsulating PPP
frames in Ethernet frames. It is used mainly with ADSL services. If your network is using
ADSL service connecting to internet, and then, select PPPOE mode.
(3) Network
When user selects Static IP as a network type, please fill in the following information to make
network works.
- IP: Assign a constant IP address which a real IP address gives from ISP to DVR system.
- Mask: It is a bitmask used to identify the sub network and how many bits provide room for
host addresses. Enter the subnet mask of the IP address which user has assigned to DVR
system.
- Gateway: A network device acts as a passageway to internet. Enter the network gateway IP
address.
- DNS: Domain Name Server translates domain names (such as www.abb.com.tw) to IP
addresses. Enter the IP address of DNS if it is available.
- Talk to Web-Client: To use the 2-Way Talk feature that allows the client and server to talk
via internet using microphone. Make sure both microphone and speakers work before using
this feature.
(4) NTP
Adjust the DVR system time according to network time server. Fill in the IP address or domain name
in Time Server column and select the Time Zone. And then, clicks Sync button to start adjust
32
(5)
(6)
(7)
(8)