To Cut And Save The Wanted Portion Of The Recorded Video - Avermedia AverDigi EH1000H-4 Nano User Manual

Name
(20) De-interlace

6.4.1.1 To Cut and Save the Wanted Portion of the Recorded Video

1. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on where you
want to start the cut. Then, click Segment to set the begin mark.
2. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on where you
want to end the cut. Then, click Segment to set the end mark. To cancel segmentation or set the segment
marks from the start, click Segment button again.
3. Click Export > Output Video Clip button to save the wanted clip.
4. In the Save As dialog box, locate on where you want to save the file or choose to Burn the video segment to
VCD/DVD ROM (only for .*mpeg file format).
5. Select the file type and select the camera information display position when playback. The camera
information will be the information of server name that user has defined in Network Setting.
6. If the select the file type is *.avi, user can mark included audio to include audio in output video segment.
7. To adjust Video Quality if needed.
8. And, select the Optimize for speed for faster file opened. For saving storage, select Optimize for storage.
9. Click Save to save the video segment.
Function
To enhance the video quality. Set the de-interlace mode to #1, if you are capturing motionless
picture and #2, if it captures lots of movement.
95