To Cut And Save The Wanted Portion Of The Recorded Video - Avermedia AVerDiGi SEB3104H User Manual

Name
(10) Segment
(11) Full screen
(12) Event Log
(13) Visual Search
(14) Camera ID
(15) Find Next
(16) Event Search
(17) Audio
(18) De-interlace
2.4.1.1

To Cut and Save the Wanted Portion of the Recorded Video

1. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on
where you want to start the cut. Then, click Segment to set the begin mark.
2. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on
where you want to end the cut. Then, click Segment to set the end mark. To cancel
segmentation or set the segment marks from the start, click Segment button again.
3. Click Export >> Output button to save the wanted clip.
4. In the Save As dialog box, locate on where you want to save the file, type the filename, and
select the video format.
Function
Keep a portion of the recorded video (see also
View in full screen mode. To return, press the right button of the mouse or ESC on
the keyboard or click the arrow icon.
When you switch to full screen in multiple-screen mode, Left click to toggle to only
display one of the video in the multiple-screen mode or all.
Show the record of activities that take place in the system.
Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second.
Show the number of cameras that are being viewed. When you are in single screen
mode, click the camera ID number to switch and view other camera.
Search for the next event or changes in the motion detector frame. You can use this
when you are using Intelligent Search or Event Search function.
Search from the recorded activities that take place in the system (i.e., Sensor,
Motion, Video Loss, POS)
Enable/disable audio sound.
To enhance the video quality. Set the de-interlace mode to #1, if you are capturing
motionless picture and #2, if it captures lots of movement.
Chapter
27
2.4.1.1).
Click to exit from
full screen mode