Table of Contents
Advertisement
3.7 To Cut and Save the Wanted Portion of the
Recorded Video
1.
Use the Playback Control buttons or drag the bar on the playback progress bar
and pause on where you want to start the cut. Then, click Segment to set the
begin mark.
2.
Use the Playback Control buttons or drag the bar on the playback progress bar
and pause on where you want to end the cut. Then, click Segment to set the end
mark. To cancel segmentation or set the segment marks from the start, click
Segment button again.
3.
Click Output button to save the wanted clip.
4.
In the Save As dialog box, locate on where you want to save the file, type the
filename, and select the video format.
3.8 To Bookmark a Section of the Video
Click Bookmark . The video playback stops when the bookmark button is
1.
executed.
2.
In the Bookmark dialog box, you may do the following:
Add to include the new reference mark in the bookmark list. You may select
-
to enable/disable file protection.
Edit to change the mark description or enable/disable file protection.
-
Delete to remove the selected reference mark in the list.
-
Delete All to remove all the reference marks in the list.
-
Exit to close Bookmark dialog box.
-
- When the bookmark is protected, the file won't be overwritten.
i
- The protected bookmark file will be deleted when the Delete the recorded
data is enable in the System setting .(also refer to
3.
Select and click one in the bookmark list to preview the file.
16
4.1 System
setting)
Advertisement
Table of Contents
