Table of Contents
Advertisement
3.7
To Cut and Save the Wanted Portion of the Recorded Video
1.
Use the Playback Control buttons or drag the bar on the playback progress bar and pause on where
you want to start the cut. Then, click Segment to set the begin mark.
2.
Use the Playback Control buttons or drag the bar on the playback progress bar and pause on where
you want to end the cut. Then, click Segment to set the end mark. To cancel segmentation or set the
segment marks from the start, click Segment button again.
3.
Click Output button to save the wanted clip.
4.
In the Save As dialog box, locate on where you want to save the file, type the filename, and select the
video format.
3.8
To Bookmark a Section of the Video
1.
Click Bookmark. The video playback stops when the bookmark button is executed.
2.
In the Bookmark dialog box, you may do the following:
Add to include the new reference mark in the bookmark list. You may select to enable/disable file
-
protection.
Edit to change the mark description or enable/disable file protection.
-
Delete to remove the selected reference mark in the list.
-
Delete All to remove all the reference marks in the list.
-
Exit to close Bookmark dialog box.
-
i
- When the bookmark is protected, the file won't be overwritten.
The protected bookmark file will be deleted when the Delete the recorded data is enable in the
-
System setting.(also refer to
3.
Select and click one in the bookmark list to preview the file.
4.1 System
setting)
37
Advertisement
Table of Contents
