System Diagnostics; Viewstation H.323 Diagnostics; Viewstation H.323 User's Guide - Polycom ViewStation H.323 User Manual

System Diagnostics

ViewStation H.323 Diagnostics

To run diagnostics during a video call, press the MENU button on the remote. The
Tip
main calling screen is displayed. When you are finished diagnosing the system, press the
© Polycom, Inc.
You can locate information about and administer the ViewStation H.323 by
selecting System Info> Admin Setup from the main calling screen.
To run diagnostics from your PC, see the Remote Management section for
details. To run diagnostics from the ViewStation H.323, go to System
Info>Diagnostics. From the Diagnostics screen, you can check the status
of the network, rate of the video signal, status of an existing video call,
color contrast on the monitor, sound coming from the ViewStation H.323,
near-end loop, and far-end loop. You can also reset the system.
4. Highlight the appropriate icons to find out the details about a specific
function of your ViewStation H.323.
5. To return to the Diagnostics screen, use the arrow buttons on the
remote to highlight the Menu icon. Then, press the SELECT button.
6. To return to the main calling screen at any time, press the
CALL•HANG-UP button on the remote.
61
10

ViewStation H.323 User's Guide