Polycom ViewStation H.323 User Manual page 84

Chapter 11 System Administration
ViewStation H.323 User's Guide
• Authentication failure—someone is attempting to log in as an
administrator with the wrong password.
• Authentication success—someone has logged in successfully as an
administrator.
• Call failed for reasons other than a busy line.
• A user has asked for help from the Technical Assistance Center.
• A ViewStation is in a telephone or video call.
• A telephone or video call has disconnected.
You can enter the following information on the SNMP screen:
• Enable SNMP—Enable SNMP.
• Administrator Contact Name—Enter the name of the person
responsible for remote management of the system. The default setting
for the field is IT Administrator.
• SNMP Console IP Address—Enter the IP address of the SNMP traps
sent by the ViewStation. Enter 0.0.0.0 in this field if any SNMP
management console is capable of receiving information from this
agent.
• Location Name—Enter the location of the ViewStation. This field
defaults to ViewStation system name @ your country name.
• Community Name—Enter the SNMP management community in
which you want to enable this agent. The default setting for this field
is Public.
• System Description—This field displays the type of
videoconferencing device. You cannot edit this field.
74 www.polycom.com