Placing A Video Call Manually - Polycom ViewStation H.323 User Manual

Chapter 2 Placing and Answering Calls

Placing a Video Call Manually

ViewStation H.323 User's Guide
From the main calling screen, use the arrow buttons on the remote to
highlight the Video Call icon, which is in the middle of the screen. Press the
SELECT button on the remote. The Video Phone screen is displayed.
1. Use the numeric keypad on the remote to enter the number (IP address)
you want to call. Enter the number in the number field at the top of the
screen.
2. Use the arrow buttons on the remote to highlight the Speed button.
Change the speed of the call, if necessary. Use the up and down arrow
buttons to select a speed from the list.
3. To place the call, press the green CALL•HANG-UP button on the
remote. The number you are calling and the speed are displayed at the
top of the screen.
On the lower left of the screen, the gray sphere progress indicator
indicates the call is going through. The indicator changes from blue to
yellow to orange, and finally to green when the call goes through.
16 www.polycom.com