Placing A Telephone Call - Polycom ViewStation H.323 User Manual

Chapter 2 Placing and Answering Calls

Placing a Telephone Call

ViewStation H.323 User's Guide
When you make an audio telephone call, the ViewStation acts as a standard
speakerphone. Third-party audio is available only in the United States and
Canada.
1. From the main calling screen, highlight the Telephone icon and press
the SELECT button. The Telephone screen is displayed.
2. Using the numeric keypad on the remote, enter the number you want
to call. If you are dialing within your private branch exchange (PBX)
system, enter the last four digits of the number.
To delete a digit, press the left arrow button on the remote. To delete
an entire phone number, use the arrow buttons to highlight the Clear
button on the screen and then press the SELECT button.
3. To place the call, press the CALL•HANG-UP button on the remote. If
you hear only the numbers being dialed and no one answers, make sure
you have the telephone cable properly connected to the back of the
ViewStation.
4. To disconnect from the call, press the CALL•HANG-UP button on the
remote. The main calling screen is displayed.
22 www.polycom.com