System Administration; Viewing And Changing The Setup Of The Viewstation H.323 - Polycom ViewStation H.323 User Manual

System Administration

Viewing and Changing the Setup of the ViewStation H.323

To check your setup during a video call, press the MENU button on the remote. The
Tip
main calling screen is displayed. When you are finished checking the system, press the
© Polycom, Inc.
This chapter provides an overview of how to view and change the setup of
the ViewStation H.323.
When you first set up the ViewStation H.323, you can display information
about the initial configuration. You can change the setup configuration at
any time from either the ViewStation or your PC. To check the setup from
your PC, see the Remote Management section for details.
To change the setup of the ViewStation from the ViewStation itself:
1. From the main calling screen, go to System Info>Admin Setup. For
details about a certain aspect of the ViewStation H.323, highlight one
of the icons. To change the setup, use the arrow buttons on the remote
to highlight a particular field. Press the SELECT button to display the
next screen.
2. To go back to the Setup screen, use the arrow buttons on the remote to
highlight the Menu icon and then press the SELECT button.
3. To return to the main calling screen at any time, press the
CALL•HANG-UP button on the remote.
67
11
ViewStation H.323 User's Guide