Setting Up The Viewstation - Polycom ViewStation H.323 User Manual

Chapter 1 Getting Started

Setting Up the ViewStation

ViewStation H.323 User's Guide
videoconference, connect two monitors to the ViewStation. Use one
monitor for video and the second monitor for displaying graphics.
The ViewStation power supply supports line voltages between 100V and
240V or 50Hz and 60Hz.
Connecting the ViewStation is easy. The cable connectors are
color-coordinated with the corresponding connectors on the back of the
ViewStation. To hook up the ViewStation, use the QuickStart booklet as a
guide and follow the steps below. The QuickStart booklet is shipped in the
ViewStation box. A PDF file of the QuickStart is also on the ViewStation
User Documentation CD, which comes in the box.
1. Place the ViewStation unit on top of the television monitor as shown
below. Make sure the front lip of the ViewStation unit hangs over the
edge of the television monitor as shown in the following picture.
2. Center the microphone on a flat surface between the meeting
participants and the ViewStation. You can use two microphones for
wider audio coverage. Although one microphone only is provided with
the ViewStation, you can order another one.
4 www.polycom.com