Near-End Loop; Reset System - Polycom ViewStation H.323 User Manual

Hide thumbs Also See for ViewStation H.323:

Table of Contents

Near-End Loop

The Near-End Loop screen lets you test the encoder/decoder of your unit.

This can help you diagnose a problem with a video call. If you send a

near-end loop during a call, the far-site sees a loop of themselves. Press any

button on the remote to stop the loop. When you are finished, highlight the

Menu icon to return to the Diagnostics screen.

The Reset System screen is used to clear existing system configurations.

Resetting the system erases your admin password and all user settings,

except your address book entries. Before you can reset your system,

however, you must enter the serial number of the ViewStation H.323. This

prevents the casual user from performing an unintentional reset. You can

find the serial number on the System Info screen.

Chapter 10

System Diagnostics

ViewStation H.323 User's Guide

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the ViewStation H.323 and is the answer not in the manual?