Polycom ViewStation H.323 User Manual page 27

If one of the menu screens is displayed and you want to view the far site again during
Tip
a call, press the NEAR or FAR button on the remote from any menu screen.
To jump from the main calling screen to the Speed Dial screen, press digits 1 through
Tip
6 on the numeric keypad of the remote. Press 0, or 7 through 9 to go to the Video Phone
screen.
© Polycom, Inc.
.
1. If there is no answer and you want to disconnect, press the
CALL•HANG-UP button on the remote. Highlight the Disconnect
Video Call icon and press the SELECT button on the remote.
If the call continues to ring and does not complete within a certain
amount of time, a message asks whether you want to retry. Select either
Yes or No.
2. If you are using one television monitor with the ViewStation, when the
call completes, the party you called is displayed on the screen. You
appear in the picture-in-picture (PIP) window at the lower right of the
screen. If you are using two television monitors, when the call
completes, the person you called appears on the main monitor and you
appear on the second monitor.
3. You can use the remote to pan, tilt, or zoom the camera. For
information about how to select the far-site and near-site cameras,
adjust the cameras, and brighten or darken a room, see the Camera
and Sound section of this document.
4. To end your call, press the CALL•HANG-UP button on the remote.
Highlight the Disconnect Video Call icon and press the SELECT
button on the remote.
17
Chapter 2 Placing and Answering Calls
ViewStation H.323 User's Guide