Main Calling Screen; Testing And Using The Viewstation - Polycom ViewStation H.323 User Manual

Testing and Using the ViewStation

© Polycom, Inc.

Main Calling Screen

The final screen displayed is the main calling screen. ViewStation setup is
complete and you can now place and receive calls and use the different
ViewStation functions.
Every time you turn on the ViewStation, an IP icon is displayed below the
Video Call icon on the main calling screen. The IP icon flashes yellow
while the ViewStation is waiting for the network to assign it an IP address.
If the IP icon turns red, the LAN cable is not connected to the network.
Check the cable connection.
The IP icon turns green when the ViewStation has been assigned an IP
address and is ready to place a video call.
Once the ViewStation is set up, if the ViewStation is connected to the
Internet, you can place a test call to one of the IP numbers that are
preprogrammed in the ViewStation address book.
The main calling screen is the starting point for everything you do on the
ViewStation. To place a call, add an entry to the address book, or check the
system setup, always start from the main calling screen.
The very first time you turn on the ViewStation and the first time you turn
it on after you do a system reset, the ViewStation displays the sequence of
system configuration screens that are described in this chapter.
13
Chapter 1 Getting Started
ViewStation H.323 User's Guide