D Programming Group Id - Icom iM423 Instruction Manual

7
DSC OPERATION
D Programming Group ID
Enter "GROUP ID" in the DSC SETTINGS menu.
q
➪ DSC Settings
MENU
(Push [MENU])
Push [ADD].
w
• The "GROUP ID" program screen is displayed.
Enter a desired group ID in the following way:
e
• Select a desired number using Dial, or [Y]/[Z]/[Ω]/[≈].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENT] or Dial.
The first digit is fixed as '0' for a Group ID.
The first two digits are '0' for any Coast station ID.
Repeat step e to input the specific 9 digits group code.
r
21
➪ Group ID
(Rotate Dial, then push [ENT].)
After entering the 9 digit code, push [ENT] or Dial to set it.
t
• The Group ID name programming screen is displayed.
Enter a desired 10 digit ID name in the following way:
y
• Select a desired character using Dial, or [Y]/[Z]/[Ω]/[≈].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENT] or Dial.
• Push [123], [!$?] or [ABC] to select a character group.
After entering the ID name, select "FINISH" using Dial, or
u
[Y]/[Z]/[Ω]/[≈], then push [ENT] or Dial to program it.
• The "GROUP ID" list screen is displayed.
Push [MENU] to exit the MENU screen.
i