D Programming Group Id - Icom iC-M91D Instruction Manual

D Programming Group ID
Enter "GROUP ID" in the DSC SETTINGS menu.
q
➪ DSC Settings
MENU
(Push [MENU]) (Push [Y]/[Z], then push [ENTER].)
Push [ADD].
w
• The "GROUP ID" program screen is displayed.
Enter a desired group ID in the following way:
e
• Select a desired number using [Ω]/[≈].
• Push [ENTER] to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENTER].
The first digit is fixed as '0' for a Group ID.
The first two digits are '0' for any Coast station ID.
Repeat step e to input the specific 9 digits group code.
r
➪ Group ID
After entering the 9 digit code, push [ENTER] to set it.
t
• The Group ID name programming screen is displayed.
Enter a desired 10 digit ID name in the following way:
y
• Select a desired character using [∫]/[√]/[Ω]/[≈].
• Push [ENTER] to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENTER].
• Push [123], [!$?] or [ABC] to select a character group.
After entering the ID name, push [
u
"FINISH," then push [ENTER] to program it.
• The "GROUP ID" list screen is displayed.
Push [MENU] to exit the MENU screen.
i
8
DSC OPERATION
∫]/[√]/[Ω]/[≈] to select
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
22