D Contest Number Set Mode - Icom IC-7700 Instruction Manual

4
RECEIVE AND TRANSMIT
D D Contest number set mode
∫ √
F-1 F-2
• Contest number set mode screen
Number Style
This item sets the numbering system used for contest
(serial) numbers— normal or short morse numbers.
Short morse numbers are also referred to as "cut"
numbers.
Count Up Trigger
This selects which of the four memories will contain
the contest serial number exchange. The count-up
trigger allows the serial number to automatically in-
crement after each complete serial number exchange
is sent.
Present Number
This item shows the current number for the count-up
trigger channel set above.
Main dial
EXIT/SET
DEF
F-4
This menu is used to set the contest (serial) number
and count-up trigger, etc.
• Setting contents
q During CW mode operation, push [KEYER]
select memory keyer screen.
w Push
EXIT/SET
push [001]
F-3
mode.
e Push [Y]
F-1
item.
r Set the desired condition using the main dial.
• Push and hold [DEF]
fault condition or value.
t Push
EXIT/SET
Normal
• Normal : Does not use short morse numbers
(default)
• 190➔ANO : Sets 1 as A, 9 as N and 0 as O.
• 190➔ANT : Sets 1 as A, 9 as N and 0 as T.
• 90➔ NO : Sets 9 as N and 0 as O.
• 90➔ NT : Sets 9 as N and 0 as T.
M2
• M1, M2, M3 and M4 can be set. (default: M2)
001
• Rotate the main dial to change the number, or push
and hold [001CLR]
rent number to 001.
4-10
to select memory keyer menu, then
to select contest serial number set
or [Z] to select the desired set
F-2
F-4 for 1 sec. to select the de-
twice to normal screen.
for 1 sec. to reset the cur-
F-4
to
F-3