Recording A Received Audio; D Basic Recording; D One-Touch Recording - Icom IC-7700 Instruction Manual

■ Recording a received audio

D D Basic recording
VOICE
F-2
D D One-touch recording
REC EXIT/SET
T/R
F-7
REC
VOICE RECORDER FUNCTIONS
Up to 20 receive voice memories are available in the
IC-7700. A total of 209 sec. of audio can be recorded in
receive messages. However, the maximum recordable
length into a single message is 30 sec.
This voice recorder records not only the received
audio, but also the information such as set operating
frequency, mode, and the recording time for your fu-
ture reference.
q Push
several times to close a multi-func-
EXIT/SET
tion screen, if necessary.
w Select the desired mode.
e Push [VOICE]
screen.
• Previously selected screen, TX or RX memory, is dis-
played. If the TX memory channel (T1–T4) appears,
push [T/R] F-7
r Push and hold
• The operating frequency, mode and current time are pro-
grammed as the memory names automatically.
t Push
momentarily to stop recording.
REC
IMPORTANT!
Push to stop recording before, or when
REC
30 sec. has elapsed from the start of recording.
The voice recorder memory records 30 sec.
(max.) of audio before
For example, when recording 40 sec. of audio,
the first 10 sec. audio will be over-written with the
last 10 sec., so that the total of audio recorded is
only 30 sec.
When you record the 21st audio message, or
when the total audio length exceeds 209 sec., the
oldest recorded audio is automatically erased to
make room for the new audio.
y Push
EXIT/SET
screen.
NOTE: When transmit (or [PTT] is pushed) while
recording, no audio will be recorded.
To record the received signal immediately, one-touch
voice recording is available.
➥ Push
momentarily to store the previous
REC
15 sec. audio.
• The recordable time period can be set in voice set mode.
(p. 7-9)
7-3
to call up the voice recorder
F-2
to select RX memory channel.
for 1 sec. to start recording.
REC
is pushed.
REC
twice to exit the voice recorder
7