D Memory Keyer Screen - Icom IC-7700 Instruction Manual

4
RECEIVE AND TRANSMIT
D D Memory keyer screen
M1
–
F-1
TRANSMIT CW
• Memory keyer screen
M4 –1
F-4 F-5
EXIT/SET
Pre-set characters can be sent using the keyer send
menu. Contents of the memory keyer are set using the
edit menu.
• Transmitting
q During CW mode operation, push [KEYER]
select memory keyer screen.
w Push
TRANSMIT
or set the break-in function ON (p. 6-3).
e Push one of the function keys ([M1]
) to send the contents of the memory keyer.
F-4
• Pushing and holding a function key for 1 sec. repeatedly
sends the contents; push any function key to cancel the
transmission.
• The contest serial number counter is incremented each
time the contents are sent.
• Push [–1]
F-5
count by 1 before sending the contents of the memory
keyer to a station a second time.
For your information
When an external keypad is connected to [EXT
KEYPAD] connector on the rear panel, the pro-
grammed contents, M1—M4, can be transmitted
without selecting the memory keyer screen.
See p. 2-7 for details.
r Push
EXIT/SET
4-8
to set the transceiver to transmit,
to reduce the contest serial number
twice to return to normal screen.
to
F-3
to [M4]
F-1