D Saving The Received Audio Memory; D Saving The Tx Memory; Saving A Voice Message Into The Usb-Memory - Icom IC-7700 Instruction Manual

7
VOICE RECORDER FUNCTIONS

■ Saving a voice message into the USB-Memory

D D Saving the received audio memory
The USB-Memory is not supplied by Icom.
DIR/FILE
F-1
• Voice recorder RX memory screen
• Voice file save screen— file name edit
• While saving
When a PC keyboard is connected to [USB] connec-
tor on the front panel, the file name can also be
edited from the keyboard.
D D Saving the TX memory
SAVE WIDE
F-6 F-7
EXIT/SET Main dial
EDIT
F-4
The recorded RX memory contents can be saved into
the USB-Memory.
q During voice recorder RX memory screen display,
push [SAVE]
F-6
• Previously selected screen, TX or RX memory, is dis-
played. If the TX message (T1–T4) appears, push [T/R]
F-7 to select RX message.
w Change the following conditions if desired.
• File name:
z Push [EDIT]
dition.
• Push [DIR/FILE]
file name, if necessary.
x Push [ABC]
to select the character group, then ro-
(MF7)
tate the main dial to select the character.
• [ABC]
(MF6)
to 9 (numerals); [Symbol]
) { } _ ~ @ can be selected.
• Push [Ω]
to move the cursor right, push [DEL]
F-2
delete a character and push [SPACE]
sert a space.
c Push
EXIT/SET
• Saving location
z Push [DIR/FILE]
screen.
x Select the desired directory or folder in the
USB-Memory.
• Push [Ω ≈]
• Push [Y]
same directory.
• Push and hold [Ω ≈]
folder in the directory.
• Push [REN/DEL]
• Push and hold [REN/DEL]
delete the folder.
• Push and hold [MAKE]
a new folder. (Edit the name with the same man-
ner as the "• File name" above.)
c Push [DIR/FILE]
name.
e Push [SAVE]
F-6
• After the saving is completed, return to voice recorder
RX memory screen automatically.
The TX memory contents can also be saved into the
USB-Memory. However, the contents are saved with
the message list, set mode conditions, etc. at the same
time. See page 12-22 for details.
7-10
to select voice file save screen.
to select file name edit con-
F-4
F-1 several times to select the
, [123] or [Symbol]
(MF6) (MF7)
: A to Z (capital letters); [123]
: ! # $ % & ' ` ^ – (
(MF7)
to move the cursor left, push [≈]
F-1
to set the file name.
to select tree view
F-1
F-4 to select the upper directory.
or [Z] to select folder in the
F-2 F-3
for 1 sec. to select a
F-4
to rename the folder.
F-5
F-5 for 1 sec. to
for 1 sec. to making
F-6
twice to select the file
F-1
.
: 0
(MF7)
to
F-3
to in-
F-4