Display Set Mode - Icom IC-7700 Instruction Manual

12
SET MODE

■ Display set mode

Meter Response
Set meter needle response from SLOW, MID and
FAST. (default: MID)
Meter Type (Normal Screen)
Selects the desired S/RF meter type during normal
screen indication from Standard, Edgewise and Bar.
(default: Standard)
Meter Type (Wide Screen)
Selects the desired S/RF meter type during wide
screen or mini scope indication from Edgewise and
Bar. (default: Bar)
Meter Peak Hold (Bar)
Turns the meter peak hold function ON and OFF.
(default: ON)
This function is used for the bar meter only.
Memory Name
Sets the memory name indication, during memory
mode operation, ON and OFF. (default: ON)
APF–Width Popup (APF OFF ON)
Selects the pop-up display for the APF filter width
from ON and OFF.
(default: ON)
MN–Q Popup (MN OFF ON)
Enables the pop-up indication capability when the
notch filter width is changed from ON to OFF.
(default: ON)
(continued)
12-10
MID
This setting is effective for the standard and edge-
wise meter type selections only.
Standard
Bar
ON
ON
• ON : The programmed memory name is displayed
above the frequency indication.
• OFF : No memory name is displayed even a mem-
ory name is programmed.
ON
ON