Level Set Mode - Icom IC-7700 Instruction Manual

12
SET MODE

■ Level set mode

SSB RX HPF/LPF
Sets the low-pass filter (100 Hz to 2000 Hz) and high-
pass filter (500 Hz to 2400) of the receive audio in 100
Hz steps in SSB mode. (default: OFF)
Tone (Bass)
Sets the bass level of the receive audio tone in SSB
mode from –5 to +5. (default: 0)
Tone (Treble)
Sets the treble level of the receive audio tone in SSB
mode from –5 to +5. (default: 0)
AM RX HPF/LPF
Sets the low-pass filter (100 Hz to 2000 Hz) and high-
pass filter (500 Hz to 2400) of the receive audio in 100
Hz steps in AM mode. (default: OFF)
Tone (Bass)
Sets the bass level of the receive audio tone in AM
mode from –5 to +5. (default: 0)
Tone (Treble)
Sets the treble level of the receive audio tone in AM
mode from –5 to +5. (default: 0)
FM RX HPF/LPF
Sets the low-pass filter (100 Hz to 2000 Hz) and high-
pass filter (500 Hz to 2400) of the receive audio in 100
Hz steps in FM mode. (default: OFF)
Tone (Bass)
Sets the bass level of the receive audio tone in FM
mode from –5 to +5. (default: 0)
Tone (Treble)
Sets the treble level of the receive audio tone in FM
mode from –5 to +5. (default: 0)
– – – – – – –
NOTE: When this setting is active, below 2 items
will be reset to default value, '0.'
– – – – – – –
NOTE: When this setting is active, below 2 items
will be reset to default value, '0.'
– – – – – – –
NOTE: When this setting is active, below 2 items
will be reset to default value, '0.'
12-4
0
0
0
0
0
0