Expansion cards and backup units
9.6.2.5
Installing the FBU holder onto the chassis
The following figure shows the 3 shoulder screw caps (one of them is hidden by
the system board), on which each FBU holder has to be placed.
Figure 67: Shoulder screw caps of both FBUs
Figure 68: Installing the FBU holder
Ê Insert the FBU holder and place it onto the shoulder screw caps (see upper
figure).
Ê Slide the FBU holder in as far as it will go (see arrow).The shoulder screw
caps will lock in the narrow ends of the keyhole slots on the FBU holder.
170
Upgrade and Maintenance Manual
RX4770 M1