MEASure Commands
Measure commands measure the output voltage, current, or power. They trigger the acquisition of new data before
returning the reading.
MEASure[:SCALar]:CURRent[:DC]?
MEASure[:SCALar]:POWer[:DC]?
MEASure[:SCALar]:VOLTage[:DC]?
Initiates and triggers a measurement. Returns the averaged output measurement. Values returned are either in
amperes, volts, or watts.
Parameter
(none)
Returns the averaged current MEAS:CURR?
Returns the averaged power MEAS:POW?
Returns the averaged voltage MEAS:VOLT?
Agilent N8900 Series Operating and Service Guide
Typical Return
<DC value>
MEASure Commands
81