Agilent Technologies N8900 series Operating Manual page 107

Command Quick Reference
[SOURce:] Commands
[SOURce:]
CURRent
[:LEVel]
[:IMMediate]
[:AMPLitude] <value>
:TRIGgered
[:AMPLitude] <value>
:MODE FIXed|STEP
:PROTection
:DELay <value>
:STATe 0|OFF|1|ON
VOLTage
[:LEVel]
[:IMMediate]
[:AMPLitude] <value>
:TRIGgerred
[:AMPLitude] <value>
:MODE FIXed|STEP
:PROTection
[:LEVel] <value>
STATus Commands
STATus
:OPERation
[:EVENt]?
:CONDition?
:ENABle <value>
:NTRansiton <value>
:PTRansiton <value>
:PRESet
:QUEStionable
[:EVENt]?
:CONDition?
:ENABle <value>
:NTRansiton <value>
:PTRansiton <value>
106
Sets the output current
Sets the triggered output current
Sets the transient mode.
Sets the over-current protection delay.
Enables or disables the over-current protection.
Sets the output voltage
Sets the triggered output voltage
Sets the transient mode.
Sets the over-voltage protection level.
Queries the operation event register.
Queries the operation condition register.
Sets the operation enable register.
Sets the negative transition filter.
Sets the positive transition filter.
Presets all Enable, PTR, and NTR registers.
Queries the questionable event register.
Queries the questionable condition register.
Sets the questionable enable register.
Sets the negative transition filter.
Sets the positive transition filter.
Agilent N8900 Series Operating and Service Guide