Set The Over-Voltage Protection - Agilent Technologies N8900 series Operating Manual

Getting Started
Method 2
Use the left and right navigation keys to navigate to the setting that you wish to change.
In the display below, the current setting is selected. Enter a value using the numeric keypad. Then press Select.
You can also use the numeric arrow keys to adjust the value up or down. Values become effective when the output is
turned on.
Method 3
Use the Current key to select the current entry field. In the display below, the current setting is selected. Enter the
desired setting using the numeric keypad. Then press Select.
If you make a mistake, either use the backspace key to delete the number, press Back to back out of the menu, or
press Meter to return to meter mode.

Set the Over-Voltage Protection

Use the front panel menu.
The front panel command menu lets you access most of the power supply's functions. The actual function controls are
located at the lowest menu level. Briefly:
Press the Menu key to access the command menu.
l
Press the left and right (<, >)navigation keys to move across the menu commands.
l
Press the center Select key to select a command and move down to the next level in the menu.
l
Press the Help key at the lowest menu level to display help information about the function controls.
l
42 Agilent N8900 Series Operating and Service Guide