SCPI Programming Reference
SCPI Programming Reference
Introduction to the SCPI Language
Commands by Subsystem
Command Quick Reference
Reset State (*RST)
SCPI Error Messages
Compatibility Commands
Related Information
IO Libraries and Instrument Drivers
The Agilent IO Libraries Suite software is provided on the Agilent Automation Ready CD-ROM provided with your instru-
ment. Installation instructions are provided on the CD-ROM.
You can also download the Agilent IO Libraries Suite software, along with IVI-COM and LabVIEW drivers from the Agi-
lent Developer Network at www.agilent.com/find/adn.
N8900 Series Documentation
You can download this document at www.agilent.com/find/n8900-doc. This document is also provided on a N8900
Product Reference CD-ROM that can be ordered separately.
For detailed information about interface connections, refer to the Agilent Technologies USB/LAN/GPIB Interfaces Con-
nectivity Guide, located on the Automation-Ready CD. Or you can download the guide from the Web at
www.a-
gilent.com/find/connectivity.
Web Interface
The N8900 series provides a Web interface that is built into the instrument. You can use this interface over LAN for
remote access and control of the instrument via a Web browser. See
Using the Web Interface
for details.
Example Programs
There are several example programs on the product page Web site at www.agilent.com/find/n8900. These are applic-
ation-focused programs that demonstrate different programming environments.
Agilent N8900 Series Operating and Service Guide
71