Interface Connections
Interface Connections
GPIB Connections
USB Connections
LAN Connections - site and private
This section describes how to connect to the various communication interfaces on your power supply. For further
information about configuring the remote interfaces, refer to
If you have not already done so, install the Agilent IO Libraries Suite, which can be found at
.
For detailed information about interface connections, refer to the documentation included with the
Agilent IO Libraries Suite.
GPIB Connections
The following figure illustrates a typical GPIB interface system.
1. Connect your instrument to the GPIB interface card using a GPIB interface cable.
2. Use the Connection Expert utility of the Agilent IO Libraries Suite to configure the GPIB card's parameters.
3. You can now use Interactive IO within the Connection Expert to communicate with your instrument, or you can pro-
gram your instrument using the various programming environments.
USB Connections
The following figure illustrates a typical USB interface system.
1. Connect your instrument to the USB port on your computer.
38
Remote Interface
Configuration.
Agilent N8900 Series Operating and Service Guide
www.agilent.com/find/iolib